Protect your wire—and your winch.
Sometimes there just isn’t room for a full-height winch. If you’re in a low winch- height situation, the Patterson Low-Profile Electric Winch can help. In addition to preventing the wire from hitting the winch, our design employs fewer moving parts for reduced maintenance. Rope guards and gear shrouds protect the mechanism while preventing fouling (and they increase safety, too).
Safe, ergonomic operation
The Patterson Low-Profile Electric Winch is available in a choice of right-hand or left-hand models. The manual locking dog ensures safe use in an emergency.
Short but mighty
The Low-Profile Electric Winch is compact, but it’s just as strong as anything else Patterson makes. With capacities ranging from 20 to 90 tons and optional galvanized construction, this winch can handle the job. It’s designed for high line speed and high line pull, with motor sizes ranging from 3 HP to 10 HP and 208V or 230/460 V 3-phase with thermostat relays – ask about our special marine motors.
|Dimensions* approximate (in.)||(lbs.)|
|Model||Drum Diameter||C||M||N||O||L||P||Weight Net||Shipping|
|WWP 30E-5.0||10||7.5||17.62||6.5||35||31 17/21||21.94||1,020||1,070|
|WWP 65E-7.5||14||9 9/17||23.75||7.25||40||38 39/47||30.28||2,140||2,190|
|WWP 75E-12.5||16||10 20/29||28.75||8 10/13||45||51.61||38||2,400||2,500|
* All performance data and specifications set forth in the above table are guidelines. The referenced data and specifications were produced under controlled testing conditions and should be used as estimates only. Due to variability in individual operators, in weather, in towing conditions, and in various other factors, actual results may vary. In addition, for the purpose of installation, please verify all dimensions as the dimensions, specifications, data and other information contained in this brochure are subject to change at any time without notice.
|Performance Data* approximate (lbs.)||Drum Capacities* approximate|
|Model||Dog Holding Capacity||Brake Holding Capacity||Line Pull 1st Wrap||Line Speed 1st Wrap||Stall Pull 1st Wrap||Ult Shock Load||1/2″||5/8″||3/4″||7/8″||1″||1 1/8″|